Sharp MX-2610N User Manual Download Page 361

Page: 361 / 1312

OPERATION GUIDE - PRINTER FUNCTION OF THE MACHINE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-001.htm[24/03/2011 2:58:32 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTER FUNCTION OF THE MACHINE

PRINTER

The machine is equipped with a full colour printing function as standard. To enable printing

from your computer, a printer driver must be installed.

See the table below to determine which printer driver to use in your environment.

Windows environment

Printer driver type

Remarks

PCL6, PCL5c

The machine support the Hewlett-Packard PCL6 printer

control languages. It is recommended that you use the

PCL6 printer driver. If you have a problem printing from

older software using the PCL6 printer driver, use the PCL5c

printer driver.

This printer driver is used in the

standard machine configuration.

This printer driver supports the PostScript 3 page

description language developed by Adobe Systems

Incorporated, and enables the machine to be used as a

PostScript 3 compatible printer.

If it is desired to use the Windows standard PS printer

driver, the PPD driver must be used.

The PS3 expansion kit must be

installed.

To install the printer driver and configure settings in a Windows environment, see

"2. SETUP IN A WINDOWS ENVIRONMENT" in the Software Setup Guide.

The Operation Guide (PC) mainly uses PCL6 printer driver screens to explain

how to print in a Windows environment. The printer driver screens may differ

slightly depending on the printer driver you are using.

Macintosh environment

Printer driver type

Remarks

This printer driver supports the PostScript 3 page

description language developed by Adobe Systems

Incorporated, and uses a PPD file to enable the machine to

be used as a PostScript 3 compatible printer.

The PS3 expansion kit must be

installed.

In a Macintosh environment, the PS3 expansion kit must be installed to use the

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 361 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: