Sharp MX-2610N User Manual Download Page 709

Page: 709 / 1312

OPERATION GUIDE - SPECIFYING A NETWORK FOLDER

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-024.htm[24/03/2011 3:01:26 PM]

MX-2610N / MX-3110N / MX-3610N

SPECIFYING A NETWORK FOLDER

IMAGE SEND

step in all >

Tap the [Browse] key in the

network folder entry
screen.

To directly enter a folder, tap the

[Path Imput to Folder] key. The soft

keyboard is displayed.

If a user name and password are

required, check with the administrator

of the server and enter the user name

and password.

Tap the key of the network

folder.

After the settings are completed, tap

You will return to the screen of step 1.

Tap the [OK] key again to accept the

destination.

Tap the key of the workgroup that you wish to access.

Tap the [Search] key and enter a keyword to search for a workgroup, server, or

network folder.

Up to 100 workgroups, 100 servers, and 100 network folders are displayed.

Tap the [Cancel] key to return to the screen of step 1.

Tap the key of the server or computer that you wish to

access.

If a screen appears prompting you to enter a user name and password, check with your

server administrator and enter the appropriate user name and password.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 709 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: