1
1.2
”SIMODRIVE 611 universal” in the SIMODRIVE 611 system
1-31
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
The most important components and their function are listed in the fol-
lowing table.
Table 1-1
Components for the SIMODRIVE 611 system
Components
Function
Line supply infeed
module
(NE module)
... has the following functions:
Interface from/to the 3–phase network
Establishes the DC link voltage
Equipment bus
Equipment bus
... supplies the control boards with various voltages
and enable signals.
DC link
... the power modules draw the power required to
control the motors from the DC link.
Power modules
... control the motors.
”SIMODRIVE 611
universal”
control board
... is used as 1 or 2–axis board in the SIMODRIVE
611 system, and can be expanded using the optional
TERMINALS or PROFIBUS–DP module.
Memory module
... is integrated on the control board, can be replaced
and has a non–volatile memory (FEPROM) to save
the firmware and the user data.
Optional modules
... expands the interface functionality of the control
board.
... the optional TERMINAL module or the optional
PROFIBUS–DP module can be used.
Motor
... is connected to the power module.
Encoders
... is the angular incremental encoder to sense the
actual position.
Parameterizing
and
start–up tool
(SimoCom U)
for PG/PC
... is a software running under Windows
95/98/NT2000/XP to parameterize, commission and
test the ”SIMODRIVE 611 universal” control board.
Furthermore, using this tool, the following functions
are possible:
Parameterizing ”SIMODRIVE 611 universal”
Axes traversed
Settings optimized
Firmware downloaded
Series commissioning
Diagnostics (e.g. measuring function)
Components
1 Product Overview
01.99
! 611ue diff !
08.02
