6
6.4
Input/output terminals of the control board
6-499
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
There is the following assignment between terminals, drives and para-
meters:
Table 6-47
Overview for freely–parameterizable output terminals
Terminals
Parameters
Drive A
Drive B
No.
Name
Min.
Stan-
dard
Max.
Unit
s
Effec-
tive
O0.A
X461.7
O0.B
X462.7
0680
Signaling function,
output terminal O0.x
0
33
82
–
Imme-
diately
O1.A
X461.8
O1.B
X462.8
0681
Signaling function,
output terminal O1.x
0
2
82
–
Imme-
diately
O2.A
X462.9
O2.B
X462.B
0682
Signaling function,
output terminal O2.x
0
1
82
–
Imme-
diately
O3.A
X461.10
O3.B
X462.10
0683
Signaling function,
output terminal O3.x
0
5
82
–
Imme-
diately
–
–
–
–
A function can be assigned to each output terminal using
these parameters.
The function number from the list of output signals is en-
tered (refer to Chapter 6.4.6).
Note:
The status of the output terminals is displayed in P0698 for
diagnostics (refer to Chapter 4.5).
–
–
–
–
0699
Inversion
Output terminal sig-
nals
0
0
FFF
hex
Imme-
diately
–
–
–
–
The output terminal signals can be inverted using this pa-
rameter.
2
0
= 1
2
1
= 2
2
2
= 4
2
3
= 8
P0699 =
0
5
0
6
hex
––> O8
O1.x
O10
O2.x
are output inverted
O0.x:
O1.x:
O2.x:
O3.x:
O4
O5
O6
O7
O8
O9
O10
O11
res.
res.
res.
res.
Example:
Note:
O4 – O11 are available on the optional TERMINAL module
(refer to Chapter 6.5).
Overview of the
terminals and
parameters
6 Description of the Functions
01.99
! 611ue diff !
