Siemens SIMODRIVE 611 universal Function Manual Download Page 437

Page: 437 / 930

6.3

Axis couplings (from SW 3.3)

6-437

SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition

Setpoints, entered via the source, are evaluated at the input for the fol-
lowing couplings:

––> via the angular incremental encoder (P0891 = 0 or 1)

––> via PROFIBUS–DP (P0891 = 4)

Input format (slave drive):
– Xext (external position reference value, number 50207)

– dXcorExt (correction, external position reference value, number

50209)

Position in MSR = input value

P0896

P0895

The following applies:

The output is evaluated ––> PROFIBUS–DP
Output format (master drive):
– XsollP (position reference value, number 50208)

– XistP (position actual value, number 50206)
– dXcor (correction, position reference/actual value, 50210)

Output value = position in MSR

P0884

P0896

The following applies:

The output value must be able to be represented using 32 bits. This
means that the maximum traversing distance that can be repre-
sented is:

P0896

P0895 (P0884)

–1)

–2

P0896

P0895 (P0884)

The standard settings for PROFIBUS–DP are:

– P0884 = 10000
– P0895 = 10000

– P0896 = 10000 MSR (

Recommendation: Modify the standard setting as follows to achieve
the best possible resolution:
– P0884 = 2048

– P0895 = 2048
– P0896 = 5 MSR (

2048

For this setting, the resolution is

and the traversing distance that can be represented is

5.24 m.

Note

Changes to P0884, P0895 and P0896 are incorporated in P0032
(external position reference value).

The external position reference value can be inverted using P0897.

Note

Changes to P0897 are incorporated in P0032 (external position
reference value).

Input/output
evaluation

Position reference
value inversion

6 Description of the Functions

01.99

02.02

Summary of Contents for SIMODRIVE 611 universal






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMODRIVE 611 universal

Reviews:

Related manuals for SIMODRIVE 611 universal

Brands by name

Popular brands

Siemens SIMODRIVE 611 universal, Function Manual

Search results

Summary of Contents for SIMODRIVE 611 universal

Reviews:

Related manuals for SIMODRIVE 611 universal

Brands by name

Popular brands