1
1.1
What can ”SIMODRIVE 611 universal” do?
1-25
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
The ”SIMODRIVE 611 universal” control board can be expanded by
one of the following option modules:
Optional TERMINAL module
This module provides an additional 8 digital inputs and 8 digital out-
puts (e.g. necessary to select and start a traversing block in the
”positioning” mode).
Note
The input/output terminals of the optional TERMINAL module are:
Before SW 4.1: permanently assigned to drive A or axis A
From SW 4.1: can be freely assigned axes
Optional PROFIBUS–DP module
To integrate the system into distributed concepts, ”SIMODRIVE 611
universal” can be operated as slave on PROFIBUS–DP using this
option module (refer to Table 1-3).
The following motors can be used with ”SIMODRIVE 611 universal”:
1FK6, 1FT6 servomotors up to 140 Nm
1FE1 permanent–magnet synchronous motors
1PH induction motors up to 100 kW (1PH6, 1PH4, 1PH2, 1PH7)
Induction motors without encoder
Standard 1LA induction motors up to 100 kW
1FN linear motors
1FW6 build–in torque motors
Note
Two different motor types can be operated with a control board
(e.g. 1FK6 synchronous motor and 1PH7 induction motor).
Unlisted motors can also be connected.
The motors which can be connected are listed in Chapter A.3.
Optional modules
Which motors can
be used?
1 Product Overview
01.99
! 611ue diff !
08.01
02.03