Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 826 / 1058

71. Routing Information Protocol (RIP) Command List
827
71.3. config rip timers
 Description
This command is used to configure RIP timers.

Format
config rip timers {update <sec 5-65535> | timeout <sec 5-65535> | garbage_collection <sec
5-65535>}

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the RIP timers on "System" interface:
update (Optional) Specifies the value of the rate at which RIP updates are sent.
<sec 5-65535>
Enter the update value used here. This value must be between 5 and 65535
seconds.
timeout (Optional) Specifies the value of the time after which a RIP route is declared to be invalid.
<sec 5-65535>
Enter the timeout value used here. This value must be between 5 and 65535
seconds.
garbage_collection
(Optional) Specifies the value of the time for which a RIP route will be kept before it is
removed from routing table.
<sec 5-65535>
Enter the garbage collection value used here. This value must be between 5 and
65535 seconds.
Zxxx0:admin# config rip timers update 60 timeout 360 garbage_collection 240
Command: config rip timers update 60 timeout 360 garbage_collection 240
Success.
Zxxx0:admin#