Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 437 / 1058

38. IP Routing Commands
438
38.2. delete iproute
 Description
This command is used to delete an IP route entry from the Switching Hub's IP routing
table.
 Format
delete iproute [default | <network_address>] [null0 | <ipaddr> | ip_tunnel
<tunnel_name 12>]

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To delete a default route from the routing table:
Zxxx0:admin#create iproute default 10.48.74.121
Command: create iproute default 10.48.74.121
Success.
Zxxx0:admin#
default Delete a default IP route entry.
<network_address>
The IP address and netmask of the IP interface that is the destination of the route. Specify
the address and mask information using the traditional format (for example, 10.1.2.3/
255.0.0.0 or in CIDR format, 10.1.2.3/8).
null0 Specifies the null interface as the next hop.
<ipaddr>Specify the IP address for the next hop router.
ip_tunnel
Specifies the IP tunnel used.
<tunnel_name 12>
Enter the IP tunnel name used here. This name can be up to 12 characters long.
Zxxx0:admin#delete iproute default 10.48.74.121
Command: delete iproute default 10.48.74.121
Success.
Zxxx0:admin#