Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 397 / 1058

34. Internet Group Management Protocol (IGMP) Commands
398

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To enable IGMP version 1 for the IP interface "System":
To configure IGMPv2 for all IP interfaces:
34.2. show igmp
 Description
This command is used to display the IGMP configuration.

Format
show igmp {ipif <ipif_name 12>}

Parameters

Restrictions
None.

Example
To display the IGMP configuration for all interfaces:
Zxxx0:admin# config igmp ipif System version 1 state enable
Command: config igmp ipif System version 1 state enable
Success.
Zxxx0:admin#
Zxxx0:admin# config igmp all version 2
Command: config igmp all version 2
Success.
Zxxx0:admin#
ipif (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12>
Enter the IP interface name used for this configuration here. This name can be up
to 12 characters long.
all Specifies that all the IP interfaces will be used.
If no parameter is specified, the system will display all IGMP configurations.