Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 141 / 1058

8. Access Control List (ACL) Egress Command List
142
8.11. show port_group
 Description
This command is used to display the port group information.

Format
show port_group {id <value 1-64> | name <name 16>}

Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To show all the port group information:
id (Optional) Specifies the port group ID.
<value 1-64>
Enter the port group ID used here. This value must be between 1 and 64.
name (Optional) Specifies the port group name.
<name 16>
Enter the port group name here. This name can be up to 16 characters long.
If not specified parameter, will show all the port group.
Zxxx0:admin# show port_group
Command: show port_group
Port Group Table
Group ID Group Name Ports
1 group1 1-2,5
2 group2 4,5,7,9,11,13
15,17,19-25
4 group3 5-7
Total Entries :3
Zxxx0:admin#