Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 341 / 1058

27. Distance Vector Multicast Routing Protocol (DVMRP) Commands
342
27.6. show dvmrp nexthop

Description
This command is used to display the DVMRP routing next hop table.

Format
show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
 Parameters
 Restrictions
None.

Example
To display DVMRP routing next hop table:
Zxxx0:admin# show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface Neighbor Address Generation ID Expire Time
--------------- ---------------- ------------- -----------
System 10.48.74.123 86 32
Total Entries : 1
Zxxx0:admin#
ipaddress
(Optional) Specifies the IP address and netmask of the destination used.
<network_address>
Enter the IP address and netmask of the destination used here.
ipif (Optional) Specifies the IP interface name used for the display.
<ipif_name 12>
Enter the IP interface name used for the display here. This name can be up to 12
characters long.
If no parameter is specified, the system will display all the DVMRP routing next hop tables.