Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 438 / 1058

38. IP Routing Commands
439
38.3. show iproute
 Description
This command is used to display the Switching Hub's current IP routing table.

Format
show iproute {[<network_address> | <ipaddr>]} {[static | rip | ospf | hardware]}

Parameters

Restrictions
None.

Example
To display the contents of the IP routing table:
<network_address>
(Optional) Specify the destination network address of the route want to be displayed.
<ipaddr>(Optional) Specify the destination IP address of the route want to be displayed. The
longest prefix matched route will be displayed.
static (Optional) Specify to display only static routes. One static route may be active or inactive.
rip (Optional) Specify to display only RIP routes.
ospf (Optional) Specify to display only OSPF routes.
hardware
(Optional) Specify to display only the routes that have been written into the chip.
Zxxx0:admin#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway Interface Cost Protocol
------------------ --------------- ------------ -------- --------
10.0.0.0/8 0.0.0.0 System 1 Local
Total Entries : 1
Zxxx0:admin#