Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 708 / 1058

62. Protocol Independent Multicast (PIM) Commands
709
62.6. config pim cbsr
 Description
This command is used to set the priority, hash mask length, and bootstrap period of the
candidate bootstrap (C-BSR) router per interface.
 Format
config pim cbsr [ipif <ipif_name 12> {priority [-1 | <value 0-255>]} | hash_masklen <value 0-
32> | bootstrap_period <value 1-255>]

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the C-BSR for the System interface :
ipif Specifies the IP interface used for this configuration.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
priority (Optional) Specifies to set the C-BSR priority. The lower value indicates lower priority. The
default value is -1. Note that only one interface can be the C-BSR in one device.
-1
Specifies that the interface will be disable to be the BSR.
<value 0-255>
Enter the C-BSR priority value used here. This value must be between 0 and 255.
hash_masklen
Enter a hash mask length, which will be used with the IP address of the candidate RP and
the multicast group address, to calculate the hash algorithm used by the router to
determine which CRP on the PIM-SM enabled network will be the RP.
<value 0-32>
Enter the hash mask lenght value here. This value must be between 0 and 32. The
default value is 30 seconds.
bootstrap_period
Specifies the interval between originating Bootstrap message.
<value 1-255>
Enter the bootstrap period value used here. This value must be between 1 and 255.
The default value is 60 seconds.
Zxxx0:admin# config pim cbsr ipif System priority 255 hash_mask length 30
bootstrap_period 60
Command: config pim cbsr ipif System priority 255 hash_mask length 30
bootstrap_period 60
Success.
Zxxx0:admin#