Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 283 / 1058

22. DHCP Relay Commands
284
22.18. show dhcp_relay
 Description
This command is used to display the current DHCP relay configuration.

Format
show dhcp_relay {ipif <ipif_name 12>}

Parameters
If no parameter is specified, the system will display all DHCP relay
configurations.

Restrictions
None.

Example
To display the DHCP relay status:
ipif (Optional) Specify the IP interface name.
<ipif_name 12>
Specify the IP interface name. The IP interface name can be up to 12 characters
long.
Zxxx0:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Disabled
DHCP/BOOTP Hops Count Limit : 4
DHCP/BOOTP Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information option 82 State : Disabled
DHCP Relay Agent Information option 82 Check : Disabled
DHCP Relay Agent Information option 82 Policy : Replace
DHCP Relay Agent Information option 82 Remote ID : Switch
Interface Server 1 Server 2 Server 3 Server 4
------------- --------------- ---------------- --------------- --------------
System 10.1.1.1 192.168.0.1
Zxxx0:admin#
ワヰヵユ ワヰヵユ