Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 676 / 1058

60. OSPFv3 Commands
677

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To set OSPFv3 router ID:
60.5. create ospfv3 area

Description
This command is used to create an OSPFv3 area.

Format
create ospfv3 area <area_id> type [normal | stub {stub_summary [enable | disable] | metric
<value 0-65535>}]
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Zxxx0:admin# config ospfv3 router_id 1.1.1.1
Command: config ospfv3 router_id 1.1.1.1
Success.
Zxxx0:admin#
<area_id>Specifies the OSPFv3 area's ID. It is a 32-bit number in the form of an IPv4 address that
uniquely identifies the OSPFv3 area in the OSPFv3 domain.
type Specifies the OSPFv3 area mode of operation. There are two types:
normal
Specifies that the OSPFv3 area will be created as a normal area.
stub Specifies that the OSPFv3 area will be created as a stub area.
stub_summary
(Optional) Specifies the OSPFv3 stub area to import inter-area prefix LSA
advertisements or not.
enable
Import inter-area prefix LSA into this stub area.
disable
Do not import inter-area prefix LSA into this stub area.
metric
(Optional) Specifies the default cost of OSPFv3 stub area.
<value 0-65535>
Enter the metric value used here. This value must be between 0 and
65535. The default value is 1.