Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 287 / 1058

23. DHCP Server Commands
288
23.1. create dhcp excluded_address

Description
This command is used to create a DHCP server exclude address. The DHCP server assumes
that all IP addresses in a DHCP pool subnet are available for assigning to DHCP clients. Use
this command to specify the IP address that the DHCP server should not assign to clients.
This command can be used multiple times in order to define multiple groups of excluded
addresses.

Format
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
 Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To specify the IP address that DHCP server should not assign to clients:
clear dhcp binding [<pool_name 12> [<ipaddr> | all] | all]
show dhcp binding {<pool_name 12>}
show dhcp pool {<pool_name 12>}
show dhcp pool manual_binding {<pool_name 12>}
enable dhcp_server
disable dhcp_server
show dhcp_server
clear dhcp conflict_ip [<ipaddr> | all]
show dhcp conflict_ip {<ipaddr>}
begin_address
Specify the starting address of the IP address range.
<ipaddr>
Specify the starting address of the IP address range.
end_address
Specify the ending address of the IP address range.
<ipaddr>
Specify the ending address of the IP address range.