Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 713 / 1058

62. Protocol Independent Multicast (PIM) Commands
714

Restrictions
None.

Example
To list all the candidate rendezvous point (C-RP) related information:
62.12. config pim last_hop_spt_switchover
 Description
This command is used by the last hop router to decide whether to receive the multicast
data from the shared tree or switch over to the shortest path tree. When the switchover
mode is set to be never, the last hop router will always receive the multicast data from the
shared tree. When the mode is set to immediately, the last hop router will always receive
the multicast data from the shortest path tree.

Format
config pim last_hop_spt_switchover [never | immediately]

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Zxxx0:admin# show pim crp
Command: show pim crp
PIM Candidate-RP Table
C-RP Holdtime : 150
C-RP Priority : 192
C-RP wildcard prefix count : 0
Group Interface
----------------------- ------------------
224.0.0.0/4 System
Total Entries: 1
Zxxx0:admin#
never Specifies that the router will always receive multicast data from the shared tree.
immediately
Specifies that the router will always receive multicast data from shortest path tree.