Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 480 / 1058

44. Limited Multicast IP Address Commands
481
44.Limited Multicast IP Address Commands
The commands are used to configure multicast packet filtering out of
the target of IGMP/MLD snooping or layer-3 function.
44.1. create mcast_filter_profile

Description
This command is used to create a multicast address profile. If the IPv4 or IPv6 option is
not specified, IPv4 is implied.

Format
create mcast_filter_profile {[ipv4 | ipv6]} profile_id <value 1-60> profile_name <name
32>

Parameters
create mcast_filter_profile {[ipv4 | ipv6]} profile_id <value 1-60> profile_name <name 32>
config mcast_filter_profile [profile_id <value 1-60> | profile_name <name 32>] {profile_name
<name 32> | [add | delete] <mcast_address_list>}(1)
config mcast_filter_profile ipv6 [profile_id <value 1-60> | profile_name <name 32>] {profile_name
<name 32> | [add | delete] <mcastv6_address_list>}(1)
delete mcast_filter_profile {[ipv4 | ipv6]} [profile_id [<value 1-60> | all] | profile_name <name
32>]
show mcast_filter_profile {[ipv4 | ipv6]} {[profile_id <value 1-60> | profile_name <name 32>]}
config limited_multicast_addr [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]} {[add | delete]
[profile_id <value 1-60> | profile_name <name 32>] | access [permit | deny]}(1)
show limited_multicast_addr [ ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
config max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]} {max_group
[<value 1-1024> | infinite] | action [drop | replace]} (1)
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
ipv4 (Optional) Specifies to add an IPv4 multicast profile.
ipv6 (Optional) Specifies to add an IPv6 multicast profile.
profile_id
Specifies the ID of the profile.
<value 1-60>
The profile ID range must be from 1 to 60
profile_name
Provides a meaningful description for the profile.
<name 32>
The profile name can be up to 32 characters long.