Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 785 / 1058

68. Protocol VLAN Commands
786
68.2. config dot1v_protocol_group

Description
This command is used to add a protocol to a protocol group. The selection of a
protocol can be a pre-defined protocol type or a user defined protocol.

Format
config dot1v_protocol_group [group_id <id> | group_name <name 32>] [add protocol
[ethernet_2 | ieee802.3_snap | ieee802.3_llc] <protocol_value> | delete protocol
[ethernet_2 | ieee802.3_snap | ieee802.3_llc] <protocol_value>]

Parameters
Zxxx0:admin#create dot1v_protocol_group group_id 4 group_name General_Group
Command: create dot1v_protocol_group group_id 4 group_name General_Group
Success
.
Zxxx0:admin#
group_idSpecify the ID of the protocol group which is used to identify a set of protocols.
<id> The ID range is between 1 and 16.
group_name
Specify the name of the protocol group.
<name 32>
Specify the name of the protocol group. The maximum length is 32 characters.
add protocol
Specify the protocol to be added. Depending on the frame type, the octet string will have
one of the following values below. The form of the input is 0x0 to 0xffff.
ethernet_2
This is a 16-bit (2-octet) hex value. Example: IPv4 is 800, IPv6 is 86dd, ARP is 806,
etc.
ieee802.3_snap
This is a 16-bit (2-octet) hex value. Example: IPv4 is 800, IPv6 is 86dd, ARP is 806,
etc.
ieee802.3_llc
This is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for
Destination Service Access Point (DSAP) and second octet for Source.
<protocol_value>
Specify the protocol value used to identify a protocol of the frame type. The form of the
input is 0x0 to 0xffff. Depending on the frame type, the octet string will have one of the
following values: For Ethernet II, this is a 16-bit (2-octet) hex value. For example, IPv4 is
800, IPv6 is 86dd, ARP is 806, etc. For IEEE802.3 SNAP, this is this is a 16-bit (2-octet) hex
value. For IEEE802.3 LLC, this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP)
pair. The first octet is for Destination Service Access Point (DSAP) and the second octet is
for Source.