Panasonic ZEQUO 6400 Operating Instructions Manual Download Page 374

Page: 374 / 1058

31. File System Management Commands

375

31.6. rename



Description

This command is used to rename a file in the file system. The pathname specifies the

file (in path form) to be renamed and the file name specifies the new file name. If the

path name is not a full path, then it refers to a path under the current directory for

the drive. The renamed file will stay in the same directory.



Format

rename {{unit <unit_id>} <drive_id>} <pathname> <filename>



Parameters



Restrictions

Only Administrator and Operator-level users can issue this command.



Example

To rename a file or directory:

unit

Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>

Enter the unit ID value here.

<drive_id>

Specifies the drive ID. If not specified, it refers to the current drive.

Specify the file (in path form) to be renamed.

Specify the new name of the file.

Zxxx0:admin#rename run.rom run1.rom
Command: rename run.rom run1.rom

Success.

Zxxx0:admin#

Summary of Contents for ZEQUO 6400



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZEQUO 6400

Reviews:

Related manuals for ZEQUO 6400

Brands by name

Popular brands

Panasonic ZEQUO 6400, Operating Instructions Manual

Search results

Summary of Contents for ZEQUO 6400

Reviews:

Related manuals for ZEQUO 6400

Brands by name

Popular brands