Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 345 / 1058

28. Domain Name System (DNS) Relay Commands
346
28.1. config dnsr

Description
This command is used to add or delete a static entry into the Switch's DNS resolution
table, or set up the relay server.

Format
config dnsr [[primary | secondary] nameserver <ipaddr> | [add | delete] static
<domain_name 32> <ipaddr>]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To set IP address 10.24.22.5 as the primary DNS server:
config dnsr [[primary | secondary] nameserver <ipaddr> | [add | delete] static <domain_name 32>
<ipaddr>]
enable dnsr {[cache | static]}
disable dnsr {[cache | static]}
show dnsr {static}
primary Specify to indicate that the IP address below is the address of the primary DNS server.
secondary
Specify to indicate that the IP address below is the address of the secondary DNS server.
nameserver
Specify the IP address of the DNS nameserver.
<ipaddr>
Specify the IP address of the DNS nameserver.
add Specify to add the DNS relay function.
delete Specify to delete the DNS relay function.
static Specify the domain name of the entry.
<domain_name32>
Specify the domain name.
<ipaddr>
Specify the IP address of the entry.
Zxxx0:admin# config dnsr primary nameserver 10.24.22.5
Command: config dnsr primary nameserver 10.24.22.5
Success.
Zxxx0:admin#