69. QoS Commands
803
Parameters
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an 802.1p user priority of 1 map to class ID of 3:
69.10. show 802.1p user_priority
Description
This command is used to display 802.1p user priority.
Format
show 802.1p user_priority {<portlist>}
Parameters
Restrictions
None.
ports
(Optional)Specifies that port used for this configuration.
portlist
Specifies the range of ports to be configured.
all
Specifies that all the ports will be used for this configuration.
<priority 0-7>
Specify the 802.1p user priority to associate with the <class_id> (the number of the
hardware queue).
<class_id 0-7>
Specify the number of the Switching Hub's hardware priority queue. The Switching Hub
has eight hardware priority queues available. They are numbered between 0 (the lowest
priority) and 7 (the highest priority).
Zxxx0:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to be configured.
Summary of Contents for ZEQUO 6400
