5. Basic Management Commands
51
5.24. config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
Restrictions
None.
Example
To configure the terminal width:
5.25. show terminal width
Description
This command is used to display the configuration of the current terminal width.
Format
show terminal width
Parameters
None.
Restrictions
None.
default Specify the default terminal width value.
<value 80-200>
Specify a terminal width value between 80 and 200 characters. The default value is 80.
Zxxx0:admin#config terminal width 90
Command: config terminal width 90
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 6400
