Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 1007 / 1058

89. Web-based Access Control (WAC) Commands
1008
89.9. config wac switch_http_port
 Description
This command is used to configure the TCP port which the WAC Switching Hub listens
to. The TCP port for HTTP or HTTPs is used to identify the HTTP or HTTPs packets that
will be trapped to CPU for authentication processing, or to access the login page. If
not specified, the default port number for HTTP is 80, and the default port number
for HTTPS is 443. If no protocol is specified, the protocol is HTTP.

Format
config wac switch_http_port <tcp_port_number 1-65535> {[http | https]}

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure a TCP port which the WAC Switching Hub listens to:
<tcp_port_number 1-65535>
Specify a TCP port which the WAC Switching Hub listens to and uses to finish the
authenticating process.
http (Optional) Specify that WAC runs HTTP protocol on this TCP port.
https (Optional) Specify that WAC runs HTTPS protocol on this TCP port.
Zxxx0:admin# config wac switch_http_port 8888 http
Command: config wac switch_http_port 8888 http
Success.
Zxxx0:admin#