Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 286 / 1058

23. DHCP Server Commands
287
23.DHCP Server Commands
DHCP (Dynamic Host Configuration Protocol) is a function to obtain an IP address
from the DHCP server when the client is booted. This Switching Hub can be used as a
DHCP server.
ヨㄓ㄂ㄏㄕチリヱチ㄂ㄅㄅㄓㄆㄔㄔ
㄂ㄔチュラヤヱチㄔㄆㄓㄗㄆㄓ
ヤㄍㄊㄆㄏㄕ
ヤㄍㄊㄆㄏㄕ
Figure 23-1
To use this Switching Hub as a DHCP server, you need to configure the range and
expiration time of an IP address assigned to the client.
For devices using a static IP address, you can create a mapping between MAC addresses
and IP addresses and assign it to the devices.
Setting changes are applied after this Switching Hub is rebooted.
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> | all]
show dhcp excluded_address
create dhcp pool <pool_name 12>
delete dhcp pool [<pool_name 12> | all]
config dhcp pool network_addr <pool_name 12> <network_address>
config dhcp pool domain_name <pool_name 12> {<domain_name 64>}
config dhcp pool dns_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool netbios_name_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool netbios_node_type <pool_name 12> [broadcast | peer_to_peer | mixed | hybrid]
config dhcp pool default_router <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool lease <pool_name 12> [<day 0-365> <hour 0-23> <minute 0-59> | infinite]
config dhcp pool boot_file <pool_name 12> {<file_name 64>}
config dhcp pool next_server <pool_name 12> {<ipaddr>}
config dhcp ping_packets <number 0-10>
config dhcp ping_timeout <millisecond 10-2000>
create dhcp pool manual_binding <pool_name 12> <ipaddr> hardware_address <macaddr> {type
[ethernet | ieee802]}
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]