Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 307 / 1058

23. DHCP Server Commands
308
23.26. clear dhcp conflict_ip
 Description
This command is used to clear an entry or all entries from the conflict IP database.

Format
clear dhcp conflict_ip [<ipaddr> | all]

Parameters

Restrictions
None.
 Example
To clear an IP address 10.20.3.4 from the conflict database:
23.27. show dhcp conflict_ip

Description
This command is used to display the IP address that has been identified as being in conflict.
The DHCP server will use ping packet to determine whether an IP address is conflicting
with other hosts before binding this IP. The IP address which has been identified in conflict
will be moved to the conflict IP database. The system will not attempt to bind the IP
address in the conflict IP database unless the user clears it from the conflict IP database.

Format
show dhcp conflict_ip {<ipaddr>}
 Parameters
<ipaddr>Specify the IP address to be cleared.
all Specify that all IP addresses will be cleared.
Zxxx0:admin#clear dhcp conflict_ip 10.20.3.4
Command: clear dhcp conflict_ip 10.20.3.4
Success.
Zxxx0:admin#
<ipaddr>Specify the IP address to be displayed.