Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 746 / 1058

64. Policy Route Commands
747
64.Policy Route Commands
The commands are used to configure policy-based routing. In general
routing, a route is selected according to metrics such as the number of
routers passed through and the bandwidth. Meanwhile, policy-based
routing allows to create an access profile and select a route for each access
profile.
64.1. create policy_route name

Description
This command is used to create a policy route and define the rule's name.

Format
create policy_route name <policyroute_name 32>
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To create a policy route named "Danilo":
create policy_route name <policyroute_name 32>
delete policy_route name <policyroute_name 32>
config policy_route name <policyroute_name 32> acl profile_id <value 1-6> access_id <value 1-
256> nexthop <ipaddr> state [enable | disable]
show policy_route
<policyroute_name 32>
The policy route name. The maximum length is 32 characters.
Zxxx0:admin#create policy_route name danilo
Command: create policy_route name danilo
Success.
Zxxx0:admin#