26. DHCPv6 Server Commands
336
26.17. config dhcpv6_server ipif
Description
This command is used to configure the DHCPv6 Server state per interface.
Format
config dhcpv6_server ipif [<ipif_name 12> | all] state [enable | disable]
Parameters
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCPv6 Server state of System Interface to enable:
ipif
Specifies the IP interface used.
<ipif_name 12>
Enter the IP interface name used. This name can be up to 12 characters long.
all
Specifies that all the IP interfaces will used.
state
Specifies the DHCPv6 server state for the specified interface.
enable
Specifies that the DHCPv6 server state for the specified interface will be enabled.
disable
Specifies that the DHCPv6 server state for the specified interface will be disabled.
Zxxx0:admin# config dhcpv6_server ipif System state enable
Command: config dhcpv6_server ipif System state enable
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 6400
