Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 809 / 1058

69. QoS Commands
810
69.18. show dscp map
 Description
This command is used to show DSCP trusted port list and mapped color, priority and
DSCP.
 Format
show dscp map {<portlist>} [dscp_priority | dscp_dscp] {dscp <dscp_list>}

Parameters

Restrictions
None.

Example
In case of project support per port configure, show DSCP map configuration on port
1:1.
Zxxx0:admin#config dscp trust 1-8 state enable
Command: config dscp trust 1-8 state enable
Success.
Zxxx0:admin#
<portlist>
(Optional) A range of ports to show. If no parameter is specified, all ports' dscp mapping
will be displayed.
dscp_priority
Specify a list of DSCP value to be mapped to a specific priority.
dscp_dscp
Specify a list of DSCP value to be mapped to a specific DSCP.
dscp (Optional) This specifies DSCP value that will be mapped.
<dscp_list>
Enter the DSCP list here.