64. Policy Route Commands
748
64.2. delete policy_route name
Description
This command is used to delete a policy route.
Format
delete policy_route name <policyroute_name 32>
Parameters
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IP route entry in the Switching Hub's IP routing table named "Duhon":
64.3. config policy_route name
Description
This command allows users to configure the different fields for a policy route entry. Users
can set the state of a policy route to enable or disable.
•
The user must create an ACL rule. If the ACL rule does not exist, the system will display
an error message.
•
If the ACL rule action is drop, these packets will not forward and the policy route will not
be implemented.
•
When a packet passes from the policy route, its TTL will decrease by 1.
•
If a user deletes an ACL rule that is linked to a policy rule, the system will display an error
message.
<policyroute_name 32>
The policy route name. The maximum length is 32 characters.
Zxxx0:admin#delete policy_route name duhon
Command: delete policy_route name duhon
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 6400
