Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 866 / 1058

74. Spanning Tree Protocol (STP) commands
867

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To map a VLAN ID to an MSTP instance:
To remove a VLAN ID from an MSTP instance:
74.8. config stp mst_config_id

Description
This command is used to configure a configuration name or revision level in the MST
configuration identification. The default configuration name is the MAC address of
the bridge.

Format
config stp mst_config_id {revision_level <int 0-65535> | name <string>} (1)
<value 1-64>
Specify the MSTP instance ID. Instance 0 represents a default instance CIST. The DUT
supports 65 instances (0-64) at most.
add_vlanDefined action type to configure an MST instance.
remove_vlan
Defined action type to configure an MST instance.
<vidlist> Specify the newly added CLI Value Type. It is similar to <portlist> type, but the value range
is 1 to 4094.
Zxxx0:admin#config stp instance_id 2 add_vlan 1
Command: config stp instance_id 2 add_vlan 1
Success.
Zxxx0:admin#
Zxxx0:admin#config stp instance_id 2 remove_vlan 2
Command: config stp instance_id 2 remove_vlan 2
Success.
Zxxx0:admin#