Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 138 / 1058

8. Access Control List (ACL) Egress Command List
139
8.8. create port_group id
 Description
This command is used to create a port group.

Format
create port_group id <value 1-64> name <name 16>

Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
Only Administrator and Operator-level users can issue this command.
Zxxx0:admin# show egress_flow_meter
Command: show egress_flow_meter
Flow Meter Information:
------------------------
Profile ID : 1 Access ID : 1 Mode : trTcm / color-blind
CIR:1000(Kbps) CBS:2000(Kbyte) PIR:2000(Kbps) PBS:2000(Kbyte)
Actions:
Conform : Permit Replace DSCP : 11 Counter : enable
Exceed : Permit Replace DSCP : 22 Counter : enable
Violate : Drop
Profile ID : 1 Access ID : 1 Mode : srTcm / color-blind
CIR:2500(Kbps) CBS:2000(Kbyte) EBS:3500(Kbyte)
Actions:
Conform : Permit Counter : enable
Exceed : Permit Replace DSCP: 33 Counter : enable
Violate : Drop
Total Entries: 2
Zxxx0:admin#
id Specifies the port group ID.
<value 1-64>
Enter the port group ID here. This value must be between 1 and 64.
name Specifies the port group name.
<name 16>
Enter the port group name here. This name can be up to 16 characters long.