Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 861 / 1058

74. Spanning Tree Protocol (STP) commands
862
74.2. show stp instance

Description
This command is used to display each instance parameters settings. Value means the
instance ID, if there is no input of this value, all instances will be shown.

Format
show stp instance {<value 0-64>}
 Parameters

Restrictions
None.
 Example
To display STP instances:
Zxxx0:admin#show stp
Command: show stp
STP Bridge Global Settings
-----------------------------
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
NNI BPDU Address : dot1d
Zxxx0:admin#
<value 0-64>
(Optional) Specify the MSTP instance ID. Instance 0 represents the default instance: CIST.
This value must be between 0 and 64.