Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 607 / 1058

57. Network Management Commands
608

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To create a trusted host:
57.4. config trusted_host

Description
This command is used to configure the access interfaces for the trusted host.

Format
config trusted_host [<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] [add | delete] {snmp | telnet | ssh | http | https | ping | all}
 Parameters
Zxxx0:admin#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
Zxxx0:admin#
<ipaddr>Specify the IP address of the trusted host.
<ipv6addr>
Specify the IPv6 address of the trusted host.
network Specify the network address of the trusted network. The form of network address is
xxx.xxx.xxx.xxx/y.
<network_address>
Specify the network address of the trusted network. The form of network address
is xxx.xxx.xxx.xxx/y.
ipv6_prefix
Specify the IPv6 network address of the trusted network.
<ipv6networkaddr>
Specify the IPv6 network address of the trusted network.
add Allow to manage applications for a trusted host.
delete Prevent from managing applications for a trusted host.
snmp (Optional) Specify the trusted host for SNMP.
telnet (Optional) Specify the trusted host for Telnet.
ssh (Optional) Specify the trusted host for SSH.
http (Optional) Specify the trusted host for HTTP.
https (Optional) Specify the trusted host for HTTPs.
ping (Optional) Specify the trusted host for Ping.
all Specify the trusted host for all applications.