Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 650 / 1058

59. Open Shortest Path First (OSPF) Command List
651

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the OSPF area aggregation settings:
59.4. delete ospf aggregation
 Description
This command is used to delete an OSPF area aggregation configuration.
 Format
delete ospf aggregation <area_id> <network_address> lsdb_type [summary | nssa_ext]

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Zxxx0:admin# config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary
advertise enabled
Command: config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary
advertise enabled
Success.
Zxxx0:admin#
<area_id>A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the
OSPF area in the OSPF domain.
<network_address>
The IP address that uniquely identifies the network that corresponds to the OSPF Area.
The network address format is 'IP address/prefix length'.
lsdb_type
Specifies the LSDB type.
summary
Specifies the type of address aggregation.
nssa_ext
Specifies the NSSA EXT type.