Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 725 / 1058

63. PIM for IPv6 Command List
726

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To set the jp_interval to 60 seconds, the hello_interval to 60 seconds, and enable the PIM6
state for interface "System":
63.2. show pim6

Description
This command is used to display the PIM6 configurations.

Format
show pim6 {ipif <ipif_name 12>}
 Parameters

Restrictions
None.
stub_interface
Specify whether this interface is a stub interface. If this interface is a stub interface, no
PIM6 packets are sent out to this interface, and any received PIM6 packets are ignored.
disable
Specify that the interface is not a stub interface. This is the default.
enable
Specify that the interface is a stub interface.
state Specify to allow the PIM6 to be disabled or enabled for the IPv6 interface.
enable
Enable PIM6 for the IPv6 interface.
disable
Disable PIM6 for the IPv6 interface.
Zxxx0:admin#config pim6 ipif System jp_interval 60 hello_interval 60 state enable
Command: config pim6 ipif System jp_interval 60 hello_interval 60 state enable
Success.
Zxxx0:admin#
ipif (Optional) Specify to the IP interface name to be displayed.
<ipif_name 12>
Enter the IP interface name.