Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 473 / 1058

42. LACP Configuration Commands
474

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure port LACP mode for ports 1 to 3:
42.2. show lacp_port
 Description
This command is used to display per-port LACP mode.

Format
show lacp_port {<portlist>}

Parameters
If no parameter is specified, the system will display current LACP mode for
all ports.

Restrictions
None.
 Example
To display the current LACP mode for ports 1 to 3 on the Switching Hub:
<portlist>Specify a range of ports to be configured.
mode Specify the port mode.
active
Specify the mode as active.
passive Specify the mode as passive.
Zxxx0:admin#config lacp_port 1-3 mode active
Command: config lacp_port 1-3 mode active
Success.
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to be displayed.
ワヰヵユ ワヰヵユ