Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 43 / 1058

5. Basic Management Commands
44
5.15. disable clipaging
 Description
This command is used to disable pausing of the screen display when show command
output reaches the end of the page. The default setting is enabled.
 Format
disable clipaging

Parameters
None.

Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To disable pausing of the screen display when show command output reaches the
end of the page:
5.16. enable telnet

Description
This command is used to enable Telnet and configure a port number. The default
setting is enabled and the port number is 23.

Format
enable telnet {<tcp_port_number 1-65535>}
 Parameters
Zxxx0:admin#disable clipaging
Command: disable clipaging
Success.
Zxxx0:admin#
<tcp_port_number 1-65535>
(Optional) Specify the TCP port number. TCP ports are numbered between 1 and 65535.
The "well-known" TCP port for the Telnet protocol is 23.