Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 679 / 1058

60. OSPFv3 Commands
680
60.8. show ospfv3 area
 Description
This command is used to display OSPFv3 area configurations or information.

Format
show ospfv3 area {<area_id>}

Parameters

Restrictions
None.
 Example
To display OSPFv3 areas:
<area_id>(Optional) Specifies the OSPFv3 area's ID. It is a 32-bit number in the form of an IPv4
address that uniquely identifies the OSPFv3 area in the OSPFv3 domain.
Zxxx0:admin# show ospfv3 area
Command: show ospfv3 area
OSPFv3 Area Settings
Area ID Type Stub Import Summary LSA Stub Default Cost
--------------- ------ ----------------------- -----------------
0.0.0.0 Normal None None
2.2.2.2 Normal None None
Total Entries: 2
Zxxx0:admin# show ospfv3 area 0.0.0.0
Command: show ospfv3 area 0.0.0.0
Area ID: 0.0.0.0 Area Type: Normal
SPF Algorithm Runs For Area 0.0.0.0: 1 time
Number Of LSA In This Area: 2 Checksum Sum: 0x0
Number Of ABR In This Area: 0 Number Of ASBR In This Area: 0
Total Entries: 1
Zxxx0:admin#