Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 47 / 1058

5. Basic Management Commands
48

Parameters
If no keyword is specified, all parameters will be reset to default settings
except IP address, user account, and history log, but the device will
neither save nor reboot.
 Restrictions
Only Administrator-level users can issue this command.

Example
To reset all the Switching Hub parameters except the IP address:
To reset the system configuration settings:
To reset all system parameters, save, and restart the Switching Hub:
config (Optional) Specify this keyword and all parameters are reset to default settings. However,
the device will neither save nor reboot.
system (Optional) Specify this keyword and all parameters are reset to default settings. Then the
Switching Hub will do factory reset, save, and reboot.
force_agree
(Optional) Specify and the reset command will be executed immediately without further
confirmation.
Zxxx0:admin#reset
Command: reset
Are you sure to proceed with system reset except IP address?(y/n)
Success.
Zxxx0:admin#
Zxxx0:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
Zxxx0:admin#
Zxxx0:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration… Done.
Saving all configuration to NV-RAM… Done.
Please wait, the switch is rebooting…
ワヰヵユ ワヰヵユ