Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 30 / 1058

5. Basic Management Commands
31
5.1. create account
 Description
This command creates user accounts. The username is between 1 and 15 characters,
the password is between 0 and 15 characters. The number of accounts (including
admin, operator, and user) is up to eight.

Format
create account [admin | operator | power_user | user] <username 15> {encrypt
[plain_text | sha_1] <password>}

Parameters
 Restrictions
Only Administrator-level users can issue this command.
clear
config terminal width [default | <value 80-200>]
show terminal width
show device_status
admin Specify the name of the admin account.
operatorSpecify the name of the operator account.
power_user
Specify a power user level account. The power user level is lower than the operator level
and higher than the user level.
user Specify the name of the user account.
<username 15>
Specify a username of up to 15 characters.
encrypt Specifies the encryption used.
plain_text
Specify the password in plain text form.
sha_1 Specify the password in SHA-1 encrypted form.
<password>
The password for the user account. The length of a password in plain-text form and
encrypted form are different. For a plain-text form password, the password must
be a minimum of 0 characters and a maximum of 15 characters. For an encrypted
form password, the length is fixed to 35 bytes long. The password is case-sensitive.