Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 797 / 1058

69. QoS Commands
798

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the traffic scheduling on CoS queue 0 with a maximum packet value of
10:
To configure the traffic scheduling on CoS queue 1, with a weight value of 25, on port
1:10:
69.6. config scheduling_mechanism

Description
This command is used to configure the traffic scheduling mechanism for each CoS
queue.

Format
config scheduling_mechanism {ports [<portlist> | all]} [strict | wrr]
 Parameters
weight Specifies the weight value for weighted round robin. The queue will operate in WRR
mode if the port mode is WRR. It will operate in strict mode if the port mode is strict.
<value 1-127>
Enter the weight value here. This value must be between 1 and 127.
Zxxx0:admin#config scheduling 0 weight 10
Command: config scheduling 0 weight 10
Success.
Zxxx0:admin#
Zxxx0:admin# config scheduling ports 1:10 1 weight 25
Command: config scheduling ports 1:10 1 weight 25
Success.
Zxxx0:admin#
ports (Optional) Specify a range of ports to be configured.
<portlist>
Enter the list of ports here.
all Specifies that all the ports will be used.
strict Specifies that all the queues will operate in strict mode.
wrr Specifies that each queue will operate based on their weight settings.