Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 855 / 1058

73. SNMPv1/v2/v3 Commands
856
73.20. enable community_encryption
 Description
This command is used to enable the encryption state on the SNMP community string.

Format
enable community_encryption

Parameters
None.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To enable the encryption state on an SNMP community string:
When creating an SNMP community string after the encryption state has been enabled,
the community string will be displayed as an encrypted string (six "*"), otherwise displayed
as plaintext, for example:
Zxxx0:admin# enable community_encryption
Command: enable community_encryption
Success.
Zxxx0:admin#
Zxxx0:admin# show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
--------------------- --------------------- ------------
****** CommunityView read_write
****** CommunityView read_only
private CommunityView read_write
public CommunityView read_only
Total Entries : 4
Zxxx0:admin#