Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 15 / 1058

1. Product Outline
16
1.5. LED Behavior
1.5.1. LED Behavior at Starting-up
When you turn on this Switching Hub, all LEDs are lit momentarily. POWER LED lights
green and STATUS LED lights orange, and then the hardware self diagnosis is executed.
Upon finishing the diagnosis, both POWER and STATUS LEDs light green.
1.5.2. LED Behavior while Operating
This Switching Hub has a set of LEDs for each port. These LEDs indicate the operation sta
-
tus of each port.
● System LED
LED Behavior Description
POWER LED Green Light Power is ON
Off Power is OFF
STATUS LED Green Light The system is operating nor
-
mally.
Orange Light The system is staring up.
Orange Blink Malfunction
(Contact the shop)
SD CARD LED Green Light SD card is inserted
Green Blink Accessing to SD card
Orange Light SD card error
Off Not inserted
STACK ID LED "H" and STACK ID are displayed
alternately. Master device
"h" and STACK ID are displayed
alternately. Backup-master device
STACK ID only Slave device
● 10/100/1000BASE-T port LED (Ports 1 to 24)
LED Behavior Description
LINK/ACT. Green Light 1000Mbps link established in full-duplex.
Green Blink Transmitting/receiving packets in 1000Mbps
full-duplex.
Orange Light 10/100Mbps link established.
Orange Blink Transmitting/receiving packets at 10/
100Mbps.
Off No device connected.