Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 461 / 1058

40. IPv6 NDP Commands
462

Example
To delete the neighbor cache.entry for IPv6 address 3ffc::1 on the IP interface
"System":
40.3. show ipv6 neighbor_cache ipif
 Description
This command is used to display the neighbor cache entry for the specified interface.
Users can display a specific entry, all static entries, all dynamic entries, or all entries.
 Format
show ipv6 neighbor_cache ipif [<ipif_name 12> | all] [ipv6address <ipv6addr> | static |
dynamic | all ] {hardware}

Parameters

Restrictions
None.
 Example
To display all neighbor cache entries for the IP interface "System":
Zxxx0:admin#delete ipv6 neighbor_cache ipif System 3ffc::1
Command: delete ipv6 neighbor_cache ipif System 3FFC::1
Success.
Zxxx0:admin#
<ipif_name 12>
Specify the IPv6 interface name.
all Specify all the IPv6 interface names.
ipv6address
Specify the IPv6 address of the neighbor.
<ipv6addr>
Specify the IPv6 address
static Specify to display the IPv6 static neighbor cache entries.
dynamic Specify to display the IPv6 dynamic entries.
all Specify to display all IPv6 addresses, static and dynamic.
hardware
(Optional) Specify to display all the neighbor cache entries which were written into the
hardware table.