8. Access Control List (ACL) Egress Command List
134
8.6.
config egress_flow_meter
Description
This command is used to configure the packet flow-based metering based on an
egress access profile and rule.
Format
config egress_flow_meter [profile_id <value 1-4> | profile_name <name 1-32>]
access_id <value 1-128> [rate <value 0-1048576> {burst_size <value 0-131072>}
rate_exceed [drop_packet | remark_dscp <value 0-63>] | tr_tcm cir <value 0-1048576>
{cbs <value 0-131072>} pir <value 0-1048576> {pbs <value 0-131072>} {[color_blind |
color_aware]} {conform [permit | replace_dscp <value 0-63>] {counter [enable |
disable]}} exceed [permit {replace_dscp <value 0-63>} | drop] {counter [enable |
disable]} violate [permit {replace_dscp <value 0-63>} | drop] {counter [enable |
disable]} | sr_tcm cir <value 0-1048576> cbs <value 0-131072> ebs <value 0-131072>
{[color_blind | color_aware]} {conform [permit | replace_dscp <value 0-63>] {counter
[enable | disable]}} exceed [permit {replace_dscp <value 0-63>} | drop] {counter
[enable | disable]} violate [permit {replace_dscp <value 0-63>} | drop] {counter
[enable | disable]} | delete]
Parameters
profile_id
Specify the profile ID.
<value 1-4>
Enter the profile ID used here. This value must be between 1 and 4.
profile_name
Specifies the name of the profile.
<name 1-32>
Enter the profile name used here. This name can be up to 32 characters long.
access_id
Specifies the access ID.
<value 1-128>
Enter the access ID used here. This value must be between 1 and 128.
rate
This specifies the rate for single rate two-color mode. Specify the committed bandwidth
in Kbps for the flow. The value m and n are determined by the project.
<value 0-1048576>
Enter the rate for single rate two-color mode here. This value must be between 0
and 1048576.
burst_size
(Optional) This specifies the burst size for the single rate "two color" mode. The unit is
Kbytes.
<value 0-131072>
Enter the burst size value here. This value must be between 0 and 131072.
Summary of Contents for ZEQUO 6400
