Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 132 / 1058

8. Access Control List (ACL) Egress Command List
133
8.5. show current_config
egress_access_profile
 Description
This command is used to display the egress ACL part of current configuration in user
level of privilege.
The overall current configuration can be displayed by "show config" command which
is accessible in administrator level of privilege.

Format
show current_config egress_access_profile

Parameters
None.

Restrictions
None.

Example
To display current configuration of egress access list table:
Zxxx0:admin# show current_config egress_access_profile
Command: show current_config egress_access_profile
#-------------------------------------------------------------------------------
# Egress ACL
create egress_access_profile profile_id 1 profile_name 1 ethernet source_mac FF-
FF-FF-FF-FF-FF
config egress_access_profile profile_id 1 add access_id 1 ethernet source_mac 00
-00-00-00-00-01 vlan_based vlan_id 1 permit
create egress_access_profile profile_id 2 profile_name 2 ip source_ip_mask 255.2
55.255.255 destination_ip_mask 255.255.255.255 dscp
config egress_access_profile profile_id 2 add access_id auto_assign ip source_ip
10.0.0.2 destination_ip 10.90.90.90 dscp 25 port_group id 1 permit counter enable
config egress_access_profile profile_id 2 add access_id auto_assign ip source_ip
10.0.0.1 destination_ip 10.90.90.90 dscp 25 port_group id 1 permit
#-------------------------------------------------------------------------------
Zxxx0:admin#