Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 139 / 1058

8. Access Control List (ACL) Egress Command List
140
8.9. config port_group
 Description
This command is used to add or delete a port list to a port group.
 Format
config port_group [id <value 1-64> | name <name 16>] [add | delete] [<portlist> | all]

Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
Add port list "1-3" to the port group which ID is "2":
Zxxx0:admin# create port_group id 2 name group2
Command: create port_group id 2 name group2
Success.
Zxxx0:admin#
id Specifies the port group ID.
<value 1-64>
Enter the port group ID used here. This value must be between 1 and 64.
name Specifies the port group name.
<name 16>
Enter the port group name here. This name can be up to 16 characters long.
add Add a port list to this port group.
delete Delete a port list from this port group.
<portlist>
Enter a list of ports used for the configuration here.
all Specifies that all the ports will be used for this configuration.
Zxxx0:admin# config port_group id 2 add 1-3
Command: config port_group id 2 add 1-3
Success.
Zxxx0:admin#