71. Routing Information Protocol (RIP) Command List
828
71.4. disable rip
Description
This command is used to disable RIP for the Switching Hub.
Format
disable rip
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable RIP:
71.5. show rip
Description
This command is used to display the RIP configuration for one or all the IP interfaces.
Format
show rip {ipif <ipif_name 12>}
Parameters
Zxxx0:admin# disable rip
Command: disable rip
Success.
Zxxx0:admin#
ipif
(Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
If no parameter is specified, the system will display RIP configuration and statistics for all the IP
interface.
Summary of Contents for ZEQUO 6400
