Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 93 / 1058

7. Access Control List (ACL) Commands
94
packet_content_mask
A maximum of four offsets can be specified. Each offset defines one byte of data which is
identified as a single UDF field. The offset reference is also configurable. It can be defined
to start at the end of the tag, the end of the Ethernet type, or the end of the IP header.
offset_chunk_1
Specifies the offset chunk 1 that allows users to examine the specified
offset_chunks within a packet at one time and specifies the frame content offset
and mask.
<value 0-31>
Enter the offset chunk 1 value here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
Enter the offset chunk 1 mask value here.
offset_chunk_2
Specifies the offset chunk 2 that allows users to examine the specified
offset_chunks within a packet at one time and specifies the frame
<value 0-31>
Enter the offset chunk 2 value here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
Enter the offset chunk 2 mask value here.
offset_chunk_3
Specifies the offset chunk 3 that allows users to examine the specified
offset_chunks within a packet at one time and specifies the frame content offset
and mask.
<value 0-31>
Enter the offset chunk 3 value here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
Enter the offset chunk 3 mask value here.
offset_chunk_4
Specifies the offset chunk 4 that allows users to examine the specified
offset_chunks within a packet at one time and specifies the frame content offset
and mask.
<value 0-31>
Enter the offset chunk 4 value here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
Enter the offset chunk 4 mask value here.